Skip to content
Home > Blog > News > Pneumatic Vacuum Lift Installation

Pneumatic Vacuum Lift Installation

This week Anglian Lifts Ltd have installed a brand new Pneumatic Vacuum Lift (PVE) for a client based in the Midlands.

It was the hottest days on record in the UK, however, the installation team still managed to install the three story lift for our customer. Here we showcase some of the installation process imagery.

Delivery of the PVE lift to site
The lift has arrived in Birmingham, already hot and the beginning of the hottest day on record for the UK
Hoisting equipment installed on floor 3 ready to lift the fully assembled vacuum tubes in to position
Lower floor aperture prior to the installation beginning
This is a view looking up through the double apatures from the ground floor to the second floor
The main unit that weighs in at almost 200kg has been lifted in to the ground floor ready for the installation
Upper floor vacuum tube being hoisted up through the aperture holes
1st floor tube ready for installation (aperture hole covered for safety)
Ground floor section placed in rough position, this is to enable the rest of the sections to be attached
Levelling the ground floor tube
Intermediate section has been fitted to the lower section ready for the first floor capsule to be attached
Ground floor section with its first intermediate section attached
Securing rings being installed to the first sections
First floor section installed (pre-finishing)
View from the top floor to ground before the top tube (level 2) has been attached
Tube installation on the top floor
Another mid floor view after the top section had been attached
Wires wires everywhere!!
PVE lift shaft
A view up the vacuum shaft from the first floor
Going up.. these are the cabin buttons
PVE lift
Mid floor installation completed
Gadgets!
Electronics closed off ready for the custom built cupboard to be made around it.

If you would like to enquire about the PVE product range and how it could fit in to your project then please take a look at our PVE page or call us on 01733 971975.

We would like to thank Only Lifts for there assistance with this project and Pneumatic Vacuum Elevators

Tags:

Leave a Reply

Your email address will not be published.

Related Posts

Anglian Lifts Queens Platinum Jubilee 2022 Opening Hours

Anglian Lifts operating hours during the Queens Platinum Jubilee weekend 2022 DAY DATE OPENING TIME CLOSING TIME Wed 1st June… 

Read MoreAnglian Lifts Queens Platinum Jubilee 2022 Opening Hours
Flow X Stairlift

Lift or Stairlift Installation or removals, we have you covered!

Whether you need a stairlift, home lift fitting or any other kind of domestic lift, removing, servicing or repairing then… 

Read MoreLift or Stairlift Installation or removals, we have you covered!
Ukraine Flag

Partner company Only Lifts sets up Ukraine support website

One of our partner companies Only Lifts, who have both direct family and friends in Ukraine, have set-up an appeal… 

Read MorePartner company Only Lifts sets up Ukraine support website
PVE lift shaft
nv-author-image

Phil Rice

Phil Rice has been in the Mobility Industry for the past 25 years, specialising in stairlifts, home lifts, hydraulic platform lifts, hoists and through floor lifts. He has in depth technical knowledge and experience in both the manufacturing and retail channels within the United Kingdom and the United States of America. Phil is currently the Managing Director of Anglian Lifts Ltd in Peterborough and a Board Director of the British Healthcare Trades Association (BHTA), prior to this he was the MD at Anglia Stairlifts Ltd, MD of MediTek Stairlifts Manufacturing facility (based in County Durham) and the President of MediTek Incorporated in Apex, North Carolina, USA.